Review on Pneumatic conveying system in thermal power plant
Keywords:
Pneumatic conveying, thermal power plant, conveying systemAbstract
As per the living standard electricity is most import energy source which is necessary to fulfil the basic requirement in daily life of human beings. In India coal based thermal power plant are the basic mean for electricity generation .After combustion of coal fly ash is the residue in various hoppers of power plant and it necessary to handle the fly ash in such way that it should not affect the performance of the thermal power plant. There are various ways to handle the fly ash in power plant but the pneumatic conveying system is the best option of ash handling but there are certain factors which effect the flow of ash through the conveying line which results in choking of line and over flow of hoppers. The explain the various factors influence the conveying system and the basic strategy to solve the existing problem.
References
Haque, M. E. (2013). Ndian Fly-Ash: Production and Consumption Scenario. International Journal of Waste Resources, 3(1), 22–25. 2.Report on Fly Ash Generation at Coal/Lignite Based Thermal Power Stations and its Utilization in the Country for the year 2016-17 CENTRAL ELECTRICITY AUTHORITY NEW DELHI DECEMBER 2017.
Jayant Khambekar, Ph.D. andRoger A. Barnum(2012),Fly ash handling challenges and solutions Jenike & Johanson, Inc, USA
(Power engineering international 2010),As h ha nd l i n g: W h y d r y b o t t o ms ar e b et ter t ha n we t b o t to ms .
A Bhatia, Pneumatic conveying system6.Peter Wypych 2001, Low-Velocity Pneumatic Conveying Technology for Plastic Pellets,Conference:
World Congress of Chemical Engineering, At Melbourne, Australia
K. Konrad 1986) Dense-Phase Pneumatic Conveying : A Review Powder Technology, 49 (1986) 1 –35
DUAN Guangbin, LIU Zongming, WU Weixiang, LIU Xiaobin, LI Liang 2010, Energy Consumption of
Dense-phase Pneumatic Conveying in Long-distance Pipe, 2010 The Second China Energy Scientist Forum.
S. M. El-Behery , A. A. El-Haroun and M. R. Abuhegazy Prediction of Pressure Drop in Vertical Pneumatic Conveyors, Journal of Applied Fluid Mechanics, Vol. 10, No. 2, pp. 519-527, 2017.
Qingliang Guan*, Zhen Liu, Xinhui Fang, Bing Liu, Baozai Peng, Ziyang Feng, Ya Suo and WenhuaLi, Experimental study on dense-phase pneumatic conveying of coal powder at high pressures, Clean Energy, 2017, Vol. 1, No. 1, 50–67
(Jia-Wei Zhou a, Yu Liu b , Chang-long Du a , Song-yong Liu a 2017) Effect of the particle shape and swirling intensity on the breakage of lump coal particle in pneumatic conveying, Powder Technology 317 (2017) 438–448
James E. HILTON1, Paul W. CLEARY, THE ROLE OF PARTICLE SHAPE IN PNEUMATIC CONVEYING, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009.
C.P.Narimatsuand M.C.Ferreira 2001, vertical pneumatic conveying in dilute and dense-phase flows: experimental study of the influence of particle density and diameter on fluid dynamic behavior,Brazilian Journal of Chemical Engineering Print version ISSN0104-6632On-lineversionISSN1678-4383
Luiz Moreira Gomes, André Luiz Amarante Mesquita, Hugo Mesquita, Lázaro J. S. Silva, PRESSURE DROP CALCULATION IN DILUTE PHASE PNEUMATIC CONVEYING SYSTEMS USING A HYDRODYNAMIC MODEL, 20th International Congress of Mechanical Engineering November 15-20, 2009, Gramado, RS, Brazil
Hasan Ghafori a,∗, Hamid Reza Ebrahimi b 2017,Numerical and experimental study of an innovative pipeline design in a granular pneumatic-conveying system, 1674-2001/© 2017 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved
Koichiro Ogataa*, Tomoya Hirosea, Sumito Yamashitaa, Effect of Particle Properties on Fluidized Powder Conveying in a Horizontal
