Study on screw conveyor using different coating materials
Keywords:
Conveyor system, Screw conveyingAbstract
Screw conveying systems might be used in various types of industries where the goods and products are moved with rotational effect of screw. The primary purpose of the model is to calculate the power, torque and axial force required for the scroll to transport the solid. The model is presented in a non-dimensional form and the procedure for implementing the model is included. The model is compared to test data from an existing publication; there was good agreement between the model and data. Results are presented in the form of graphs to illustrate the influence of key parameters. The 3D model is created in CATIA software and this model is imported for simulation in ANSYS. There are four types of material used SS440, Tin, Zinc and ZrN. Comparative analysis study is done for all the four materials for total deformation directional deformation and equivalent stress.
References
Olanrewaju T. O., Jeremiah I. M., Onyeanula P. E (2017). “Design and fabrication of a screw conveyor” AgricEngInt: CIGR Journal Open access Vol. 19, No. 3
Sanket Patil, Shashank Saoji, Ajinkya Shahane, Pratik Phadatare (2017). “Design and Analysis of Twin Screw Conveyor” International Conference on Ideas, Impact and Innovation in Mechanical Engineering ISSN: 2321-8169 Volume: 5 Issue: 6
Prasanna, Sharanabasappa, Vishwanath B R, Kishore (2016). “Design and Fabrication of Cam Operated Coveyor for Spherical Components Transporation” IJSRSET | Volume 2 | Issue 6 | Print ISSN: 2395-1990 | Online ISSN: 2394-4099
Mohammad Zahed Raza, Prof.K.R.Sontakke, Prof. I.A.Quazi (2016). “A review and design of spiral aerator for earthen making process” International Journal of Research in Advent Technology (IJRAT) (E-ISSN: 2321-9637
Evstratov V.A., Rud A.V., Belousov K.Y (2015) “Process modelling vertical screw transport of bulk material flow” ScienceDirect, Procedia Engineering 129 P.no. 397 – 402
Patil. S. S., Jadhav S. M (2015): “Design of Screw Feeding System with Shaft less Fights Bending Analysis in Earthen Pot Making Equipment”, International Engineering Research Journal (IERJ), 1(2), pp. 972-975.
Vijay M. Patil1 Niteshkumar A. Vidya2 Roshan L. Katkar3 Piyush S. Pande (2015). “Type of Conveyor System: A Review” International Journal for Scientific Research & Development| Vol. 2, Issue 12, | ISSN (online): 2321-0613
Ahmad S., J. R. Shapour, F. M. Seyed, B. P. Mojtaba, and E. Ebrahim. (2014). “Design and development of a conveyor belt lift with tractor P.T.O. as prime mover”. Journal of Applied Science and Agriculture, 9(3): 1193–1200.
Santanu Chakarborthy, Anshuman Mehta (2014) “Product Design of Semi Flexible Screw Conveyor” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 5, PP 01-13
