A Study on Disc Brake Design & Analysis Using Topology Optimization Technique
Keywords:
Disc brake, Finite element analysisAbstract
In automobile the new models are proposed every day, the motive of today automobile industry is to produce vehicle with better performance and which is light in weight. In this, studies shows that disk brake are mostly used in automobile because the stopping power of disk brake is better than other commonly used brakes, but conventional disc brake are very bulky and heavy in weight. The present study focuses on the optimization of disc brake using topology optimization without affecting the basic performance of the disc brake. The ANSYS software is used for topology optimization. This topology optimization gives information of the part of material to be removed without affecting of disc brake performance. In this study, it was observed that 29% overall weight of disc brake is reduced without effecting disc brake performance.a
References
Shadman Tahmid, and Saima Alam” Numerical Analysis of Frictional Heat Generation in Bicycle Disc Brake” AIP Conference Proceedings 1851, 020042 (2017); doi: 10.1063/1.4984671
Mr. Sumeet Satope” Thermal Analysis of Disc Brake” IJIRST –International Journal for Innovative Research in Science & Technology| Volume 3 | Issue 12 | May 2017ISSN (online): 2349-6010
Rakesh Jaiswal, Anupam Raj Jha “ STRUCTURAL AND THERMAL ANALYSIS OF DISC BRAKE USING SOLIDWORKS AND ANSYS” International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 67-77, Article ID: IJMET_07_01_008
A. Vennila “Performance Analysis on Disc Brake of Super Bikes” International Journal of Engineering Research & Technology (IJERT) http://www.ijert.org ISSN: 2278-0181 IJERTV5IS100331 Vol. 5 Issue 10, October-2016
Srinivas Talari” Design and Thermal Analysis of Disc Brake for Sports Bikes”International journal and magazine of engineering technology management and research,Volume 3 (2016)
Vijay Kumar B, Pavan Kumar B K2, Manjunatha “Finite Element Analysis of Two Wheeler Disc Brake Rotor” Imperial Journal of Interdisciplinary Research (IJIR) Vol-2, Issue-7, 2016 ISSN: 2454-1362, http://www.onlinejournal.in
Mr.R.Vijay Krishna, Dr.C.Naga Bhaskar” Performance Analysis of Various Disc Brake Profiles” International Journal of Engineering Trends and Technology (IJETT) – Volume 35 Number 5- May 2016
Sanaka.durga srinivas prasad, k.sandeep kumar “design and analysis of drilled rotar of a disc brake” International journal of eminent engineering technologies Volume 3, Issue 2 JULY 2015
Shailendra pratap gautam“ Finite Element Analysis Of Disc Brake using ANSYS WORKBENCH Software” International Journal of Scientific & Engineering Research, Volume 6, Issue 4, April-2015 1954 ISSN 2229-5518
Mr. Nilesh R. Farande” Finite Element Analysis of Brake Disc of Motorcycle” International Journal on Recent Technologies in Mechanical and Electrical Engineering (IJRMEE) ISSN: 2349-7947 Volume: 1 Issue: 3
A. Belhocinea,Chob, M. Nouby Y. B.Yi A. R. Abu Bakar” Thermal analysis of both ventilated and full disc brake rotors with frictional heat generation” Applied and Computational Mechanics 8 (2014) 5–24.
ISHWAR GUPTA GAURAV SAXENA, VIKAS MODI Thermal Analysis Of Rotor Disc Of Disc Brake Of Baja Sae 2013 Car Through Finite Element Analysis” International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 International Conference On Emerging Trends in Mechanical and Electrical Engineering (ICETMEE- 13th-14th March 2014.
Swapnil R. Abhang#1, D.P.Bhaskar” Design and Analysis of Disc Brake” International Journal of Engineering Trends and Technology (IJETT) – Volume 8 Number 4- Feb 2014
K.Sowjanya “Structural Analysis of Disc Brake Rotor” International Journal of Computer Trends and Technology (IJCTT) – volume 4 Issue 7–July 2013
Manjunath T V1, Dr Suresh P M2” Structural and Thermal Analysis of Rotor Disc of Disc Brake”International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 2, Issue 12, December 2013.
