A Literature Survey On The Thermal Enhancement Of Heat Exchangers
Keywords:
Heat exchangers, nuclear fuel pinAbstract
The process of transferring heat between fluids requires a device known as a heat exchanger. The fluids may be in separate chambers or in direct contact with one another, depending on the design of the heat exchanger. Though many of the same concepts apply to the construction of heat exchangers and other devices that use energy sources like nuclear fuel pins and fired heaters, they are often not considered heat exchangers. This paper deal with the literature survey of the recent ongoing advances in the thermal enhancement of the heat exchangers and also briefly discusses the heat transfer mechanism.
References
N. S. Khashi’ie, I. Waini, A. R. M. Kasim, N. A. Zainal, A. Ishak, and I. Pop, “Magnetohydrodynamic and viscous dissipation effects on radiative heat transfer of non-Newtonian fluid flow past a nonlinearly shrinking sheet: Reiner–Philippoff model,” Alexandria Eng. J., vol. 61, no. 10, pp. 7605–7617, 2022, doi: 10.1016/j.aej.2022.01.014.
S. M. Z. Hossain, M. F. Irfan, E. M. Elkanzi, and K. M. Saif, “Fabrication of a hybrid shell and double pipe heat exchanger by means of design and performance assessment,” Chem. Eng. Process. - Process Intensif., vol. 165, no. March, p. 108430, 2021, doi: 10.1016/j.cep.2021.108430.
B. Saleh and L. Syam Sundar, “Thermal performance, embodied energy and environmental CO2 emissions analyses for double pipe U-bend heat exchanger working with MWCNT/water nanofluid,” Int. J. Therm. Sci., vol. 169, no. December 2020, p. 107094, 2021, doi: 10.1016/j.ijthermalsci.2021.107094.
K. U. Rehman, M. Y. Malik, Q. M. Al-Mdallal, and W. Al-Kouz, “Heat transfer analysis on buoyantly convective non-Newtonian stream in a hexagonal enclosure rooted with T-Shaped flipper: Hybrid meshed analysis,” Case Stud. Therm. Eng., vol. 21, no. April, p. 100725, 2020, doi: 10.1016/j.csite.2020.100725.
C. K. Mangrulkar, A. S. Dhoble, J. D. Abraham, and S. Chamoli, “Experimental and numerical investigations for effect of longitudinal splitter plate configuration for thermal-hydraulic performance of staggered tube bank,” Int. J. Heat Mass Transf., vol. 161, 2020, doi: 10.1016/j.ijheatmasstransfer.2020.120280.
S. S. Mozafarie and K. Javaherdeh, “Numerical design and heat transfer analysis of a non-Newtonian fluid flow for annulus with helical fins,” Eng. Sci. Technol. an Int. J., vol. 22, no. 4, pp. 1107–1115, 2019, doi: 10.1016/j.jestch.2019.03.001.
P. Moorthy, A. N. Oumer, and M. Ishak, “Experimental Investigation on Effect of Fin Shape on the Thermal-Hydraulic Performance of Compact Fin-and-Tube Heat Exchangers,” IOP Conf. Ser. Mater. Sci. Eng., vol. 318, no. 1, 2018, doi: 10.1088/1757-899X/318/1/012070.
H. Zhang, Y. Kang, and T. Xu, “Study on Heat Transfer of Non-Newtonian Power Law Fluid in Pipes with Different Cross Sections,” Procedia Eng., vol. 205, pp. 3381–3388, 2017, doi: 10.1016/j.proeng.2017.09.845.
